 |
350 DURAWALL® |
|
| Code Accepted Fiberglass DURAWALL® Bathtub walls meet or exceed performance requirements:
|
| For a finishing touch, look at the 300.600 DURATRIM™ window trim kit |
|
 Grab bars must be anchored to structural support behind DURAWALLS®. Grab bars not included. |
||||||
| |||||||
|
Model No. |
Color |
UPC |
350WHT |
White |
6 71031 00266 2 |
350BN |
Bone |
6 71031 00267 9 |
350BT |
Biscuit |
6 71031 00379 9 |
 |
General: Furnish and install as shown on plans DURAWALL® Bathtub Walls, model 350, as manufactured by E.L. Mustee & Sons, Inc. The wall system shall be three-piece construction with molded-in shelf and double face tape applied to edges of underside for a better seal. Panels shall include 20% fiberglass reinforced composite material and be manufactured with matched metal molds using extreme heat and pressure with a uniform thickness of 70 mils. Shall be semi-gloss, scuff-resistant surface. Unit shall meet or exceed applicable tests, per ANSI Specification Z 124.1. Color ____ (White, Bone or Biscuit). Shall include adhesive, caulk and instructions. Weight 62 lbs., cubic feet 12.0. Install in compliance with local codes. Carton Contains: Center panel, two corner/end panels, adhesive, caulk and instructions. Carton is 60"x55"x7". |
 |
Specification Sheet Printable PDF Version |
 |
Instruction Sheet Printable PDF Version |
 |
|
top
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
